WEP
WEP
To connect using WEP, make sure the following profile options are used.
l
Enter the
SSID
of the Access Point assigned to this profile
l
Set
EAP Type
to
None
l
Set
Encryption
to
Manual WEP
l
Set
Auth Type
to
Open
WEP Profile Configuration
Click the
WEP keys/PSKs
button.
WEP Keys
Valid keys are 10 (for 40-bit encryption) or 26 (for 128-bit encryption) hexadecimal characters. Enter the key(s) and click
OK
.
Once configured, click the Commit button. Ensure the correct Active Profile is selected on the Main tab and warmboot. The
SCU Main tab shows the device is associated after the radio connects to the network.
E-EQ-MX3PLUSRG-J [ 211 ] MX3Plus Reference Guide
