Tx Power
Tx Power
Desired transmit power.
Options:
Maximum (Max power for current regulatory domain)
50, 30, 20, 10, 5 or 1 mW
Default:
Maximum
Bit Rate
Options:
Auto (Rate negotiated automatically with the AP)
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or 54 Mbit
Default:
Auto
Radio Mode
Specify 802.11a, 802.11b and/or 802.11g rates when communicating with the AP. The options displayed for this parameter
depend on the type of radio (802.11b/g or 802.11a/b/g) installed in the MX3Plus.
Options:
B rates only (1, 2, 5.5 and 11 Mbps)
BG Rates Full (All B and G rates)
G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
BG optimized or BG subset (1, 2, 5.5, 6, 11, 24, 36 and 54 Mbps)
A rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
ABG Rates Full (All A rates and all B and G rates with A rates preferred)
BGA Rates Full (All B and G rates and all A rates with B and G rates preferred)
Ad Hoc
Default:
BG Rates Full (for 802.11b/g radio)
BGA Rates Full (for 802.11a/b/g radio)
Note: For the 802.11 b/g radio, some SCU versions may have the default set as BG Optimized rather than BG Rates Full.
It is important this parameter correspond to the AP to which the device is to connect. For example, if this parameter is set to G
rates only the LXE device may only connect to APs set for G rates and not those set for B and G rates.
The options for this parameter should be set as follows:
E-EQ-MX3PLUSRG-J [ 191 ] MX3Plus Reference Guide
