manualshive.com logo in svg

LXE MX3Plus, Reference Manual

The LXE MX3Plus Reference Manual is a comprehensive guide that allows users to fully utilize the features of this remarkable product. Available for free download at manualshive.com, this manual provides step-by-step instructions and valuable information to enhance your experience with the LXE MX3Plus. Get the most out of your device with this essential manual.

Share
Download
background image

Using Remote Management

Using Remote Management

For Your MX3Plus

1. Configure the radio to connect to the network running the Mobile Device Server. After the MX3Plus is connected, pro-

ceed to step 2.

2. If it is desired to configure the radio using the Summit package, add the configured package to the Wavelink Avalanche

MC Console and enable it.

3. Verify RMU.CE.CAB exists in the \System\RMU folder.

4. Double click the MX3Plus enabler CAB file in the \System folder.

5. The enabler automatically launches after installation and contacts the Mobile Device Server. The Avalanche MC Con-

sole connected to that Mobile Device Server identifies the remote device and performs a sync. This downloads any
available packages available for the MX3Plus.

Using eXpress Scan

MX3Plus eXpress Scan Desktop Icon

If the MX3Plus has an eXpress Scan icon on the desktop, eXpress Scan may be used for the initial configuration of the device.
If the eXpress Scan icon is not present on the desktop, install the Enabler following the instructions earlier in this chapter. If
the icon is still not present, the Enabler must be updated as detailed in the installation instructions earlier in this chapter.
If the eXpress Scan icon is present, follow these steps to configure the MX3Plus to connect with the wireless network and the
Mobile Device Server.

Step 1: Create Barcodes

Barcodes are created with the eXpress Config utility on the desktop/laptop computer, not the mobile device. Depending on the
barcode length and the number of parameters selected, eXpress Config generates one or more barcodes for device
configuration. The barcodes contain configuration parameters for the wireless client in the LXE device and may also specify
the address of the Mobile Device Server.
Barcodes should be printed at a minimum of 600 dpi.

Step 2: Scan Barcodes

For each LXE device to be configured, please follow these instructions.
Start eXpress Scan on the MX3Plus by double clicking the eXpress Scan icon.
Enter the barcode password, if any.

E-EQ-MX3PLUSRG-J [ 176  ] MX3Plus Reference Guide

Summary of Contents for MX3Plus

















































































































































































































































































Reviews:

No comments

Related manuals for MX3Plus

M3 Mobile MM3 Manual preview
MM3
Brand: M3 Mobile Pages: 30
M3 Mobile MM3 Quick Manual preview
MM3
Brand: M3 Mobile Pages: 14
Hand Held Products DOLPHIN 7600 Manual preview
DOLPHIN 7600
Brand: Hand Held Products Pages: 13
CipherLab 9400CE Reference Manual preview
9400CE
Brand: CipherLab Pages: 111
Samsung SantaFe NT-Q1 Service Manual preview
SantaFe NT-Q1
Brand: Samsung Pages: 73
Samsung NP-Q1 Ultra Series Service Manual preview
NP-Q1 Ultra Series
Brand: Samsung Pages: 107
Samsung NP-Q1 User Manual (Vista) (Spanish) Información Importante preview
NP-Q1 User Manual (Vista)
Brand: Samsung Pages: 212
Samsung SGH-I780 User Manual preview
SGH-I780
Brand: Samsung Pages: 224
NEXCOBOT MiniBot User Manual preview
MiniBot
Brand: NEXCOBOT Pages: 38
Datalogic Kyman\ User Manual preview
Kyman\
Brand: Datalogic Pages: 117
BTM ULBG 452-18 Manual preview
ULBG 452-18
Brand: BTM Pages: 33
NEC MOBILEPRO HPC User Manual preview
MOBILEPRO HPC
Brand: NEC Pages: 35
RuggON VIKING MT7030 User Manual preview
VIKING MT7030
Brand: RuggON Pages: 21

Brands by name

Popular brands

Load more brands