LXE MX3, User Manual

Page: 7 / 64

E-EQ-MX3RFIDOGWW-A MX3-RFID User’s Guide
Introduction
Overview
The LXE MX3-RFID mobile device is a rugged, portable, hand-held Microsoft® Windows® CE
.NET equipped device capable of wireless data communications.
It is the RFID version of the LXE MX3X mobile device.
The mobile device can transmit information using a 2.4 GHz radio (with an internally mounted
antenna) and it can store information for later transmission through an RS-232, InfraRed, or USB
port. The device can be scaled from a limited function batch computer to an integrated RF
scanning computer.
The mobile device is horizontally oriented and features backlighting for the display. The touch-
screen display supports graphic features and Windows icons that the Windows CE .NET operating
system supports. The keys on the keypad are constructed of a phosphorescent material that can
easily be seen in dimly lighted areas.
The MX3-RFID has an RFID module permanently attached to the back of the device. The module
protects the RFID antenna and tag reader. A passive vehicle cradle is available that has been
designed specifically for the MX3-RFID device deeper back cover.
Device-specific cables are available. The stylus in the Stylus Kit (shipped with each unit) is used
to assist in entering data and configuring the unit. Protective film for the touchscreen is available
as an accessory.
Note: Until the main battery and backup battery are completely depleted, the mobile device is
always drawing power from the main and backup batteries ( On ).