LXE MX3, User Manual

Page: 38 / 64

32 The Keypad
MX3-RFID User’s Guide E-EQ-MX3RFIDOGWW-A
LED Functions
Figure 26 LED Functions
Across the top of the keypad are LEDs that provide visual cues to current computer operation.
When the LED is not illuminated, the function is inactive.
LED When illuminated ...
2nd
The next keypress is a 2
nd
keypress.
•
Amber when on
•
Blinks amber during configuration key sequence.
ALT
The next keypress is an ALT keypress.
•
Amber when on and unlit when off.
CTRL
The next keypress is a CTRL keypress.
•
Amber when on and unlit when off.
SHFT
The next letter is the uppercase letter on alpha keys and the shifted character on the
numeric keypad keys.
•
Amber when on and unlit when off.
CAPS
Uppercase letters are active until the CAPS key sequence is pressed again.
•
Amber when on and unlit when off.
SCNR
Barcode scanner function, affected by both tethered scanners and the scanner
endcap.
•
Red - scanning.
•
Green - good scan.
•
Unlit - scanner is inactive.
BATT
B
Backup Battery. When illuminated, the backup battery is charging. When unlit, the
backup battery is not charging
STAT
Status Indicator.
•
Amber – device is booting up.
•
Blinking Green when display Suspend state begins.
BATT
M
Main Battery. When illuminated, main battery capacity is low.
•
Red – low battery.
•
Blinking Red – power fail.
•
Unlit - Main battery is not low OR all charge is depleted in both batteries..
CHGR
Charger. When on, the mobile device is receiving external power from the DC power
jack on the endcap.
•
Red - Main battery is charging.
•
Amber – Fault or temporary standby (Contact LXE Customer Support).
•
Green - battery charge is complete and the mobile device is connected to
external power through the power jack on the endcap.