LXE 9000A3775, User Manual

Page: 8 / 64

2 Important: MX3 Battery Charger Versions
MX3 Multi-Charger Plus User’s Guide E-EQ-MX3MCPLUS-E
Important: MX3 Battery Charger Versions
Refer to the sections below to determine the version of the MX3 MultiCharger to use with your
MX3 device. The MX3 device is designed to provide 8+ hours of continuous operation when
used with the correct battery and charger.
Battery Label Location
The all MX3 battery pack have a label (see the figure below for the location of the label on the
main battery packs).
The label contains the battery part number:
158224-0001 – Use in the MX3Plus, MX3X, MX3 (DOS) and MX3-CE.
159922-0001 – Use in the MX3-RFID only.
156213-0001 – Use in the MX3 (DOS) and MX3-CE only.
MX3Plus
The MX3Plus uses the following battery: MX3A378BATT (LXE part no. 158224-0001 ).
The MX3 MultiCharger Plus is designed to charge and analyze this battery. To ensure proper
battery life, examine the label located on the back of the MX3 MultiCharger Plus. The MX3
MultiCharger Plus designed to work with the MX3Plus battery is identified by the LXE part no.
157360-0126 . Charging the MX3Plus battery in other versions of the MX3 MultiCharger Plus
results in shoter operating times for the battery.
MX3 Multi-Charger Plus
9000A377CHGR5WW (with power cord)
9000A377CHGR5WW (power cord not included)
158224-0001