LXE 9000A3775, User Manual

Page: 26 / 64

20 Progress Monitors
MX3 Multi-Charger Plus User’s Guide E-EQ-MX3MCPLUS-E
Ready
The Ready indicator is displayed at the end of the charge only or the analyze process. After the
charge only process, the screen indicates the battery pack’s voltage.
READY
12.2
V
Figure 12 LCD Screen, Charge Only, Battery Ready
The LCD indicates:
•
The charging is complete and the battery is ready for use (READY).
•
The battery voltage after charge (12.2VDC). This reading can vary between
10.2VDC and 12.6VDC.
After the analyze process, the screen displays the battery pack’s voltage and capacity.
ANALYZE
READY
1400
mAh
12.2
V
Figure 13 LCD Screen, Analyze, Battery Ready
The LCD indicates:
•
The battery was under analysis (ANALYZE).
•
The process is complete and the battery is ready for use (READY).
•
The battery capacity as it is measured during the analysis (1400mAh).
•
The battery voltage after charge (12.2VDC). This can vary from 12.0VDC to
12.7VDC.