LXE 8650, User Manual

Page: 196 / 308

184 SE4400 Imager Barcodes
Bluetooth Ring Scanner Guide E-SW-BLUESCANPG-A
Trigger Modes
Note: LXE mobile devices with ring decoders are designed to be operated in Level Trigger
Mode. LXE recommends leaving the Trigger Mode default value unchanged.
Parameter Default Value: PL4407: Level Trigger Mode
MS4407: Presentation Mode
Use this parameter to determine when the laser is activated and decoding begins, how long the
laser remains on and what determines the cessation of the laser scan and decode process.
Select a trigger mode by scanning one of the barcodes that follow. If you wish to change your
selection, scan Cancel.
Level Trigger Mode A Scan button press activates the laser and decode processing. The
laser remains on and decode processing continues until a Scan button
release, a valid decode or the decode session time-out is reached.
Presentation Trigger Mode When the ring scanner detects an object in its field of view it scans and
attempts to decode. The range of object detection does not vary under
normal lighting conditions. This applies to decode mode only. In
Presentation Mode the unit does not enter its sleep state.
Host Trigger Mode Triggering signal comes from a host command. Any actual Scan button
press is interpreted by the scanner engine as a Level triggering option.
Level Trigger Mode
Presentation Trigger
Mode
Host Trigger Mode