LV switch SIP-T800 User Manual Download Page 92

Page: 92 / 111

SIP-T800 IP Phone User Manual



Enter the corresponding channel number in the extension area: 0-30.



Click

Confirm

to save the operation or cancel to abandon the operation when

finished.

6.3.2 Paging list configuration

- Configure paging list via phone interface

1. Press

Menu->Features->Paging list .

2. Press

to select the corresponding group.

Before configuration, the label is empty.

3. Press

Option

soft key then press

Edit

soft key.

4. Enter the multicast IP address and port number in the

Address

field (for

example: 224.5.6.20:10008).

5. Enter the group name in the

Label

field.

6. Enter the corresponding channel number in the

Channel

area.

The valid channel numbers are from 0 to 30.

7. Press

Save

soft key to save the operation.

8. Repeat steps 2-7 to add more groups.

- Configure paging list via web interface

1. Click

Directory- Multicast IP-Paging list.

2. Fill in the multicast address IP a port number in the multicast address input

box (for example: 224.5.6.20:10008).

3. Enter the group name in the

Label

area.

Summary of Contents for SIP-T800
















































































































Search results

Summary of Contents for SIP-T800

Reviews:

Related manuals for SIP-T800

Brands by name

Popular brands

LV switch SIP-T800, User Manual

Search results

Summary of Contents for SIP-T800

Reviews:

Related manuals for SIP-T800

Brands by name

Popular brands