SIP-T800 IP Phone User Manual
84
picking up the phone to automatically call the hotline.
4. Press the
Save
soft key to save the operation.
5.11 QR code
T800 supports scanning the QR code provided by the phone through a smart phone to
enter the web interface, so as to configure the phone information on the phone. Before
scanning the QR code, the phone must be connected to the local area network to
which the phone belongs, and in the same network segment as the phone, such as
connected to the WIFI of the router.
The interface of the mobile phone login phone belongs to the following figure. The
specific usage method is the same as that of the computer web page. If you want to
know the configuration method of each function, please check the function
introduction of each chapter. If you have any questions about the use of the QR code,
please contact your network administrator.
5.12 Conference
T800 can initiate a three-party call locally, and use the conference softkey during a
