LvSwitch IPPBX 8000 Manual
51
Figure 5-14 Dynamic route
Dynamic route setting description as:
Table 5-6 dynamic route setting
Interface
Instruction
RIP
Click “enable” to enable Routing Information
Protocol
Version
Consistent with docking routing devices, optional
"default", "RIPv1" And "RIPv2".Select "default" it
automatically negotiate with the docking routing
device.
Encryption
Non-encrypted and TEXT and MD5
When selecting “RIPv1” it is no need to
encrypted,for selecting”RIPV2”,negotiated with
the docking device whether to encrypt or not.The
device supports text encryption and MD5
encryption. Set encryption in the password box
below Code.
5.2.4 NAT Configuration
Network Address Translation (NAT) enables multiple computers in the LAN to access the Internet through a
small number of public IP addresses and save public IP addresses. As LANs are isolated from the Internet,
NAT can also provide some assurance of Security. Select “Advanced Options> NAT”, and enter the NAT
Configuration page as shown in Figure 5-13.
Figure5- 15 NAT Configuration
NAT
Configuration Description
:
Table 5- 7 NAT Configuration
Item
Description
Summary of Contents for IPPBX8000
Page 1: ...LvSwitch IPPBX8000 User Manual ...
Page 2: ...LvSwitch IPPBX 8000 Manual ii Version Product Version 1 6 0 1 Document Version A ...
Page 174: ...LvSwitch IPPBX 8000 Manual 172 Mode Engineering staff background use the customer can not use ...
Page 197: ...LvSwitch IPPBX 8000 Manual 195 ...