LLMC10
Modular Charging
Cabinet
Assembly Instructions
W O R K S P A C E S
www.luxorworkspaces.com
800-323-4656
Parts Key
D x4
Thumbscrew
C x2
Bolt,
Phillips Head
A x1
Charging Cabinet
B x1
Cord Wrap
Tools Required:
Phillips Head Screwdriver
1
Position cord wrap on the rear of
the cabinet, over the corresponding
threaded mount holes.
B
C
A
Remove the rubber caps from
the top of the cabinet.
4
Insert each bolt into a lock washer,
then a flat washer, then use to
attach the casters to the Dolly.
2
3
Remove the drawer from the
bottom/lower cabinet by pressing
the release lever on each side
of the drawer track.
Position a second cabinet on top,
aligning the threaded
mount holes.
5
Using the thumbscrews attach the lower
Cabinet to the upper Cabinet.
6
D