Luxier
SP26-GS
Rev. A3 122017
9
7. Hang the unit on the wall to complete the
installation. Make sure the unit is seated prop-
erly. Apply silicon sealant on left and right
sides of the shower panel. (
NOTE:
do not seal
the bottom of the panel, this will allow any
possible future leaks to drain out the panel)
8. Attache shower head. Apply some (
NOTE:
PTFE tape on the thread to prevent leaking)
Installation (cont.)
7. Connect hand shower hose to the main
panel body. Attach the hand shower to the
hose. (
NOTE:
Install the rubber washer to pre-
vent leak.)
