Product Name:
Resin Angel Outdoor Patio Fountain
SKU #:
WHF718
Contact: [email protected]
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Quantity
Fountain Base
1
Pump
1
Fountain Bowl
1
Angel and Pot
1
Compatible Pumps for this fountain:
Pump Model No.
JR250
JB333
YH-300-70
Tools required for assembly:
No tools required for assembly.
Assembly Instructions:
1.
Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2.
Select a flat, level surface for the assembly and final location of your fountain.
3.
Place the fountain on a flat, level surface. From the opening at the back of the fountain base and bowl,
insert the water supply tube into the pump outlet. Place the pump upright in the basin and draw the pump
power cord out of the fountain back. (①)
4.
Add clean water into the basin. The water level should be approximately 1.18in (30mm
)
lower than the edge
of the basin. The pump will be submerged in the water. (
②)
5.
Connect the pump power cord to a ground fault circuit interrupter (GFCI) outlet and the product will begin
to function as intended. (
③)
6.
To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
where it cannot be damaged.
7.
Do not leave your fountain running for extended periods of time when no one is present to observe the
performance.
8.
Check the area around your fountain on a regular basis to ensure that there is no leakage.
9.
Please refresh the fountain with water each week to ensure it in good condition.
10.
Do not add any harmful chemicals to the water as it may alter the paint finish.
