Lux Tools A-KS-20, Original Instructions Manual

Page: 55 / 248

GB
55
• Insufficient maintenance.
You can reduce the risks considerably by fol-
lowing the tips below:
– Maintain the device in accordance with
the instructions in the operating instruc-
tions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and
your hands, in particular, are kept warm.
– Take regular breaks and move your hands
at the same time to promote circulation.
Personal protective equipment/sensible
clothing
When cutting, wear the following protective
equipment:
Avoid with your clothing that you get caught
on something:
•
Wear only close-fitting clothing!
• Do not wear any jewellery!
•
If you have long hair, wear a hair net!
Your device at a glance
►
P. 3, item 1
1. Rear handle
2. Fill opening for chain oil (tank cover)
3. Front hand guard (trigger for chain brake)
4. Saw chain
5. Saw rail
6. Fastening nut (for saw rail)
7. Chain wheel guard
8. Sight glass for oil level
9. Rear hand guard
►
P. 3, item 2
10. Safety lock
11. On-Off switch
12. Battery pack
13. Front handle
14. Protective cover
►
P. 3, item 3
15. Display for remaining capacity
16. Push button for capacity display
17. Locking button
18. Control lights
19. Battery charger
Scope of delivery
•
Drive unit
• Saw rail
•
Saw chain
• Protective cover
•
Battery pack
• Battery charger
•
Instructions for use
Assembly
Assembling the saw rail and saw chain
►
P. 4, item 4
– Loosen the nut (6) on the chain wheel
guard (7) and remove chain wheel guard.
Eye protection: wrap-around gog-
gles/protective visor on the helmet
Ear protection: earplugs/ear muffs
Head protection: safety helmet with
visor
Foot protection: safety shoes with
gripping soles, steel caps and leg
protection
Hand protection: protective chainsaw
gloves
Clothing: safety overalls (cut-proof),
Safety jacket (cut-proof)
Note: The actual appearance of your
product may differ from the illustra-
tions.
DANGER! Risk of injury during
operation!
Improperly mounted parts
can cause severe and even fatal inju-
ries when using the device! This
device may only be commissioned if
all parts are mounted completely and
tightly and no part is damaged!
• Therefore, read the whole chapter
before you assemble the parts!
• Assemble the parts carefully and
completely.
• Use tools when their use is sug-
gested.
CAUTION! Risk of injuries due to
cuts!
The teeth of the saw chain are
very sharp! Protective gloves must be
worn for all work on the chain.
WARNING! Risk of injury! An
improperly mounted saw chain
causes uncontrolled cutting behaviour
of the device! When assembling the
chain, heed the prescribed running
direction!