31
If you are unable to correct a fault yourself, please
contact our technical support directly. Please note
that improperly conducted repairs will void your
rights under warranty and may cause you additional
expenses.
Disposal
Disposal of the appliance
This appliance must not be disposed of with regular
household waste! Dispose of the appliance in the
appropriate manner. For more information, consult
your community waste disposal service.
Disposing of fuels and lubricants
Waste fuels, waste oils, and materials containing oils
(air filter, rags, etc.) may not get into the environment.
– Bring waste materials that could damage the
environment to a collection point of the dealer or
in your community.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.
Technical data
Fault/malfunction
Cause
Remedy
Motor will not start.
Is the tank empty?
Is ignition switch set to
[0]
?
Set ignition switch to
[1]
.
Ignition cable plug loose?
Push the plug firmly onto the spark
plug.
Ignition cable plug dirty?
Clean the plug.
Is there excess fuel inside the combustion
chamber?
Push choke lever to
[ ]
, start the
motor a few times.
If the motor will not start: remove
the spark plug and dry the elec-
trode.
Spark plug dirty?
Clean the spark plug
Is the distance between the electrodes of
the spark plug too large?
Set the gap to 0.6 to 0.7 mm.
Wrong fuel or mixture?
Drain the tank and fill with the cor-
rect mixture.
Spark plug defective?
Cutting equipment runs while
motor is idling.
Wrong setting for idling?
Contact service partner.
Cutting equipment continues
to run after throttle has been
released.
Clutch set incorrectly?
Motor will not reach its maxi-
mum speed.
Air filter dirty?
Cleaning/replacing the air filter –
Spark plug dirty?
Is the electrode separation of the spark
plug too large?
Set the gap to 0.6 to 0.7 mm.
Wrong fuel?
Drain the tank and fill it with the cor-
rect fuel.
WARNING! Risk of fire or environmental
damage!
Avoid damage caused by leaking
fuel: drain the tank prior to disposal.
Item number
481 940
Cubic capacity
24,5 cm³
Rated power
0,85 kW
Tank capacity
0,33 l
Maximum motor speed
10500 min
-1
Cutting length
550 mm
Maximum stroke rate
2050 min
-1
Acoustic pressure (L
PA
)*
96,5 dB(A)
(K = 3 dB(A))
Acoustic power (L
WA
)*
109,2 dB(A)
(K = 3 dB(A))
Vibration
< 4 m/s²
(K = 1,5 m/s²)
Weight
5,5 kg
Spark plug
Bosch L8RTF
GB
Heckenschere_Benzin_481940.book Seite 31 Mittwoch, 28. September 2016 10:47 10
