LION I/O Modules
▪
Final Shutdown and Disposal
63
12
Final Shutdown and Disposal
Mind the valid environmental standard of your country for the final shutdown and
disposal.
For the final shutdown, the device has to be disassembled. Electric parts must be
disposed after the national electronic scrap regulation. You take the responsibility
for the shipped article. You have to dispose the article after the terms of use and
legal liability on your own costs and exempt Lütze Transportation GmbH from the
responsibilities of §10 passage 2 ElektroG (Take-back obligation of the
manufacturer) and any third party in this content.
If you have handled the device to a commercial third party without any contractual
acceptance of the disposal, you have to take back the device after the final
shutdown on your own cost and the legal liability.
The entitlement of indemnity from Lütze Transportation GmbH by the customer
does not prescribe before two years after the final shut down of the device. The
two year deadline of the suspension of statue for limitations can start with a
written message about the terms from you to Lütze Transportation GmbH.
