Ethernet/IP bus interface for DIOLINE20 Vers. 1.00
Description of device
15/45
4.2.2 Power supply
A DC voltage of 24 V DC must be used for the power supply in accordance with the railway
specification EN 50155.
The X3 terminal for the power supply is designed as a
5-pin slot-in terminal with a cage tension spring.
6.3 mm flat-pin connector X0
for PE contact
Fig. 3: Power supply terminals
Pin no.
Signal
Description
1
24 V
24 V supply
2
24 V
24 V supply
3
PE
Earth connection
4
0 V
0 V supply
5
0 V
0 V supply
Fig. 4: Pin assignment of power supply terminal
The device must not be operated without the protective conductor connected,
as the housing could be live if the device is faulty.
Warnung
4
5
3
2
1
