Delivery characteristic curves
Dosing head spare parts kits including valves
44
© Lutz-Jesco GmbH 2015
BA-10102-02-V02
Stepper motor-driven diaphragm dosing pump MEMDOS SMART LD
Operating Instructions
15 Delivery characteristic curves
This Chapter is intended to give you an idea of the delivery capacity that
the dosing pump can achieve at specific back pressures. These delivery
capacities were determined on the manufacturer's test stands. They
apply at 20 °C (68 °F) for water, at 100 % stroke frequency. The delivery
capacity depends on the medium (density and viscosity) and tempera-
ture. Since these conditions vary at every installation location, you should
calibrate the dosing pump.
0,0
5,0
10,0
15,0
20,0
25,0
0
5
10
15
20
25
Deliver
y ca
pacity [l/h]
Pressure [bar]
LD 10
LD 5
LD 15
LD 20
Fig. 46: Delivery characteristic curves MEMDOS SMART LD 2 – 20
LD 5
Summary of Contents for MEMDOS SMART LD
Page 2: ......
