Intended Use
Notes on product warranty
8
© Lutz-Jesco GmbH 2015
BA-70200-02-V01
Polymer preparing and dosing station EASYPURE Powder and Liquid
Operating instructions
3 Intended Use
3.1 Notes on product warranty
Any non-designated use of the device can impair its function and the
protection provided. This leads to invalidation of any warranty claims!
Please note that liability is on the side of the user in the following cases:
n
the device is operated in a manner which is not consistent with these
operating instructions, particularly safety instructions, handling
instructions and the section "Intended Use".
n
Information on usage and environment (see section 5 „Technical
data“ on page 13) is not adhered to.
n
if people operate the device who are not adequately qualified to carry
out their respective activities.
n
No original spare parts or accessories of Lutz-Jesco GmbH are used.
n
Unauthorised changes are made to the device.
n
The user uses different dosing media than those indicated in the
order.
n
Maintenance and inspection intervals are not adhered to as required
or not adhered to at all.
n
The device is commissioned before it or the corresponding system
has been correctly and completely installed.
n
Safety equipment has been bridged, removed or made inoperative in
any other way.
3.2 Intended purpose
The polymer preparing and dosing station EASYPURE Powder and Liquid
is intended for the following purpose: Generation of a polymer solution to
be used as a powder polymer flocculation aid or a fluid concentrate with
drinking water. Provision of the polymer solution in a metering chamber.
Both basis solutions and ready-to-use solutions with pre-determined
concentrations can be prepared. The pre-set concentration threshold
amounts to 0.3 – 0.6 %.
The system can be used to generate salt or coagulant solution which do
not present large amounts of soiling.
3.3 Device revision
This operating instructions apply to the following devices:
Device
Month / year of
manufacture
EASYPURE
02/2014 onwards
Table 4: Device revision
3.4 Prohibited dosing media
This device serves the preparation of solutions which do not damage the
device. Each individual product requires calculations and preparations. All
chemicals used must be approved by the manufacturer.
The viscosity of the solution may not exceed 2500 mPas in standard
designs. The gear agitator design enables a viscosity of max. 5000 mPas
3.5 Water quality
Drinking water or water of a similar quality should be used. It should be
free of solids and suspended matter.
Summary of Contents for EASYPURE 1000
Page 2: ......
