![background image](http://html1.mh-extra.com/html/lutron-electronics/tc-424/tc-424_operation-manual_1951100009.webp)
4-3. RTD Pt100 ohm SOURCE PROVIDE PROCEDURE
1) Power on the meter by press the " Power button " ( 3-3,Fig. 1 ) > 2 sec.
2) Press the " Source/Measure button " ( 3-8, Fig. 1 ) select to SOURCE Model .
3) Press the " FUNCTION button " ( 3-7, Fig. 1 ) select to Pt100 Function.
4) Press the " ► button "( 3-4, Fig. 1 )or " ◄ button"( 3-2, Fig. 1 ) select
a digit for adjustment. The blinking digit identifies the digit selected.
5)
Press the "
▼
button "( 3-6, Fig. 1 ) or "
▲
button "( 3-5, Fig. 1 ) to adjust the
value of the digit. Press and Hold the
▼
or
▲
button to rapidly adjust the
value. And will generate the Pt100 ohm Temp. output same as the display value.
Fig. 1-A
Fig. 1-B
Remark :
when carrying out calibration on a resistance temperature detector or a resistance
measurement unit in three-wire connection, the supplide terminal adapter can be used
to achieve a three-wire configuration (Fig. 1-A).2W Lo and LO terminals can
be shorted (Fig. 1-B) Otherwise connect as Fig.1-A
4-4. 400 ohm SOURCE PROVIDE PROCEDURE
1) Power on the meter by press the " Power button " ( 3-3,Fig. 1 ) > 2 sec.
2) Press the " Source/Measure button " ( 3-8, Fig. 1 ) select to SOURCE
Model .
3) Press the " FUNCTION button " ( 3-7, Fig. 1 ) select to 400 ohm Function.
4) Press the " ► button "( 3-4, Fig. 1 )or " ◄ button"( 3-2, Fig. 1 ) select
a digit for adjustment. The blinking digit identifies the digit selected.
5)
Press the "
▼
button "( 3-6, Fig. 1 ) or "
▲
button "( 3-5, Fig. 1 ) to adjust the
value of the digit. Press and Hold the
▼
or
▲
button to rapidly adjust the
value. And will generate the 400 ohm. output same as the display value.
7