Need additional assistance? Call the Lutron Technical Assistance Hotline
1-800-523-9466
Please provide exact model number when calling.
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299 U.S.A.
Made and printed in U.S.A. 6/98 P/N 366-626 Rev. B
1.
Activate the Switch Closure Interface (RA-SCI) as shown in the RadioRA Setup Guide.
2.
Assign the dimmers/switches that the timeclock will control to inputs 1 and 2 on the RA-SCI as shown in the
RadioRA setup guide.
NOTE: Refer to the RadioRA Setup Guide for selecting input closure types. Programming an input closure to
the "maintained" function will turn a selected set of lights on at sunset, and the same lights off at sunrise. If
programmed to the "momentary" function the lights will turn on to the programmed level, but will not return to
off without further operator action.
Programming RA-SCI
Programming the Timeclock
Set Clock
1.
Connect 24VAC power to the proper terminals in the timeclock and plug in.
2.
If the digital display reads [12 HR] press ENTER. If it reads [24 HR] press the HOUR key until [12 HR]
appears then press ENTER. [SE E] with the letters date underneath will appear in the Display.
3.
Press HOUR to advance the time in hours. Watch the am/pm display to assure you are in the right time frame.
4.
Press MIN. to advance the time in minutes.
5.
Press DAY to advance the day display.
6.
After time and day are set, press ENTER. [SE E] with the letters DATE underneath will appear on the display.
7.
Press MONTH to advance the month.
8.
Press DATE to advance the date.
9.
Press YEAR to advance the year.
10. When correct month, day, year are on display press ENTER.
Set Astronomic Time
1.
Press MODE until [LAEN 10] shows in display (see map in the Tork installation instructions for your Latitude).
2.
Press LAT to change the degrees. You can set between 10 and 60 degrees North or South latitudes.
Examples: Orlando FL - N28
°
, Denver CO - N39
°
, Philadelphia PA - N40
°
, Seattle WA - N47
°
.
3.
Press MODE to go back to the time display.
Entering Astronomic ON and/or OFF Function
1.
Press MODE until [LA EN #] appears in the display (# means your latitude entered previously).
2.
Press ENTER and a display appears with your sunset or sunrise time with two numbers after a "+" symbol or
a "-" symbol.
3.
If the word [ON] is in the display, this will activate the event. If the word [OFF] is in the display this will
deactivate the event. Use the [ON, OFF] button to change.
4.
Press DAY until the day you want the event to occur appears and then press [SELECT]. Repeat for more days.
NOTE: Do not select seasons or holidays unless you have programmed them. See the Tork programming
instructions to program seasons and holidays.
5.
To add an offset of up to 99 minutes before or after sunset or sunrise, press [OFFSET] then the two numbers
after the "+" or "-" will change. If you go above 99 the "+" and "-" will change. The "+" means after and the "-"
means before. The numbers are the offsets in minutes.
6.
Press MODE when done to return to your current time screen.
NOTE: For more features of the time clock refer to the Tork programming instructions located on the inside of the
timeclock enclosure.
Lutron and RadioRA are registered trademarks of Lutron Electronics Co., Inc.
© 1998 Lutron Electronics Co., Inc.
Worldwide Technical and Sales
Assistance
If you need assistance call the toll-free
Lutron
Technical Assistance Hotline. Please provide exact
model number when calling.
(800) 523-9466 (U.S.A., Canada, and the Caribbean)
Other countries call (610) 282-3800
Visit our Website at www.lutron.com
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299 U.S.A.
Phone: (610) 282-3800
Fax:
(610) 282-3090
