Installation Instructions
Please Leave for Occupant
This product may be covered by one or more of the following U.S. patents: 4,835,353;
4,924,349. The design of this product may be covered by one or more of the follow-
ing U.S. trademark registrations: 1,617,349; 1,626,714; 1,624,489; 1,624,490; and
1,638,913. Lutron, Nova, and the Nova T
logo are registered U.S. trademarks of
Lutron Electronics Co., Inc. © 2004 Lutron Electronics Co., Inc.
2-Way Switch
NT-2WS-AU
16 A Max. 220–240 V~ 50/60 Hz
Important Notes - Please Read Before
Installation
Install in accordance with all national and local electrical codes.
Multigang Installations: In multigang installations several
Nova T
controls are grouped horizontally in one ganging wall-
box or in a series of connected wallboxes. Multigang wallplates are
available from Lutron to simplify and beautify these installations. If
you are planning a multigang installation, read ganging information
before beginning installation.
Cleaning Instructions
To clean, wipe with a clean damp cloth. DO NOT use any chemi-
cal cleaning solutions.
Installation
1.
Turn power OFF at circuit breaker or fusebox. Wiring with
power on may cause injury or damage switch. Warranty void
if switch is miswired.
2.
Remove wallplate from switch to prevent damage and to
access mounting holes. Pull from top of wallplate to remove.
Set aside.
3.
Connect wallbox leads to switch. See Figure A or B for wiring
diagram. If an earth ground wire is not in the wallbox, contact
a licensed electrician.
Figure B. Wiring Diagram - 2-Way
Earth
Live
Earth
Load
Neutral
NT-2WS-AU
NT-2WS-AU
Figure A. Wiring Diagram - Single-Pole
NT-2WS-AU
Earth
Live
Load
No connection
Neutral
4.
Push wires into wallbox, allowing room for switch to be insert-
ed. Do not pinch wires between wallbox and switch.
5.
Mount switch to wallbox using screws provided. Switch must
be mounted vertically. See Figure C.
6.
Replace wallplate by snapping it back on to the dimmer.
7.
Turn on power.
Figure C. Mounting Diagram
= Indicates different
colored screw
220–240 V~
50/60 Hz
Switch
Mounting Screws
Package Contents
LUTRON
Earthing Lug
220–240 V~
50/60 Hz
= Indicates different
colored screw
Switch
Switch
Mounting
Screws
Wallplate
