6
Lutron Athena System User Guide
Operations and Maintenance
(continued)
Maintenance Requirements
Lutron products are designed to have minimal maintenance requirements as detailed below:
Hubs
Clean the front cover as needed.
Wall Controls
Clean the front surface with a soft towel moistened with a mild soap solution (non-ammonia).
Clean approximately every six months. Do not spray cleaning solution directly on any wall control.
Any liquid entering products with line (mains) voltage may reach components, cause personal injury, damage
the equipment, and void the warranty.
Sensors
No maintenance required.
Load Controller Panels
Visually inspect installation periodically. Keep airflow clear of obstructions.
Battery-Powered Devices (Battery Replacement)
Replace batteries as needed with the correct type of battery. See the individual product installation sheet for
battery specifications.
Warranty Information
Please see the warranty enclosed with the product, or visit:
http://www.lutron.com/en-US/ResourceLibrary/warranty/Lim_Warranty_starting_Oct2011.pdf
For additional information, please refer to the corresponding data sheet, located at www.lutron.com/athena
Features Not Yet Available
As of System Firmware version 1.7 / App version 7.4.
Coming Soon
1. Enhanced account access
a. Multiple users will be able to access a single Athena system with individual myLutron accounts in a
future update
b. Sharing system access between myLutron accounts
c. Managing system access (add / remove users)
2. Creating & deleting Timeclock events in the app
3. Control of window shades in the app
4. Lighting Designer enhancements
a. Ability to manually enter values for intensity / color
b. Raise / Lower
c. Flash
5. Activating demand response in the app
