68
The user interface of the LUPUSEC-XT1 mobile app
With the mobile web interface, you can check the status of your alarm system, arm
and disarm the alarm system, check for open windows or doors and many things
more.
The bottom section of the mobile interface contains the menu bar. You can switch
between the various information widgets.
The following menus are available:
The Status menu
Perimeter status
You can check whether everything is OK at home. The green check mark signals
easily and quickly: “Everything OK - windows and doors are closed”.
The green check mark becomes a red cross
, if either windows or doors are
open or an alarm is active.
Alarm status
If an alarm is active, this screen reads “Alarm”.
In the following menu, you can arm the alarm system, set it in the home mode, or
disarm the alarm system.
You can activate or deactivate the siren (of the control unit) by means of ON or OFF.
The Sensor menu
The Sensor widget shows the status of the sensors. All sensors with a “condition” are
listed right on top (e.g. open window/door contacts or temperatures).
