55
Remote access via the internet
The LUPUSEC-XT1 enables you to retrieve and control the status of the entire
system via the internet or an iPhone/iPad or Android mobile phone. Even the pictures
form your LUPUS cameras or recorders can be shown at a central interface.
To be able to access the XT1 via the internet, check the following item beforehand:
1.
Is the alarm system connected to the router and do you have access from your
local computer?
If no, please proceed according to the chapter “Connect the control unit”.
2.
Did you create a fixed address for the internet access in your account at our
website
? Example:
If no, please refer to the description of our DDNS service below. Alternatively,
you can use any other provider such as
let your internet provider assign you with a fixed IP address.
If yes, open the XT1 website and go to the menu “Network”
“DDNS”. Enter
your DDNS data accordingly in the DDNS menu at the LUPUS website.
If your router is state-of-the-art and supports UPnP, you can activate the service in
the “UPnP” menu of the XT1:
If your router does not support or has not activated UPnP, an error message is
displayed.
Now you can access the system from the browser of your PC, laptop, or mobile
phone as in the following example:
If your does not support UPnP, open the configuration menu of the router:
In most of the cases, open the login page of your router by entering your standard
gateway address (gateway to the internet) in the web browser.
You get this gateway IP address through Windows Clients by clicking on Start and
