background image

1

Lunt LS60Tha Solar Telescope Manual

Congratulations and  thank  you  for  your  purchase of a  Lunt  Solar  Systems  solar telescope!    Before you 

begin  setting  up  your  telescope  and  observing  the  Sun  for  the  first  time,  please  review  the  safety 

statements  below.    If you  have  any  questions  about  the  safe  use  of any  Lunt  Solar  Systems product, 

please contact our customer service department before you operate the equipment.

 

SAFETY STATEMENTS

Never look at the Sun with your naked eye or with a telescope that is not specifically designed to do so.  

Permanent and irreversible eye damage may result. 
Check  that  all  filters  are  installed  correctly  and  are  free  of  any  surface  contamination  that  may 

compromise performance and/or potentially damage the surface of the optic when exposed  to the Sun, 

i.e. fingerprints.   Perform a routine safety check before each viewing session. 
Never leave the solar telescope unsupervised while pointed at the Sun. People who are not familiar with 

the  correct  operating  procedures of the  system  may inadvertently  replace  the  diagonal  or  remove  the 

filter itself not being aware of the integrated safety features of each. 
Always be aware that you are viewing in direct sunlight. Take necessary precautions to protect yourself 

from sunburn and heat exposure.
Never attempt to disassemble the system.   Doing so will void your warranty and compromise its safety. 

Do not use your system if it is compromised in any way due to

 

mishandling or damage.

The Blocking Filter diagonal must always be in place when the telescope is in use. Lunt Blocking Filters 

are not interchangeable with products from other vendors.
Protect your instrument from shock due to drops.  The etalon is the heart of the Lunt optical system, and 

while it can withstand normal use, a major shock may cause the etalon to de-contact, which will require 

a trip to the factory for a non-warranty repair.  Store the instrument in its original case when not in use.  

With proper handling and care your Lunt Solar Systems telescope should last a lifetime.

 

UNPACK YOUR NEW PURCHASE!

 

In the shipping box you will find

:

   Metal Locking Carry Case with foam insert

   Optical Tube Assembly with focuser attached

   Clamshell Mounting Ring

   Blocking Filter Diagonal (600 mm or 1200 mm)

   Keys for the case

   Warranty Card

   Instruction Manual

   Allen Wrench for Focuser Tension Screw

   Focuser Locking Screw (wrench & screw located in or near eyepiece cutouts in case)

Lunt Solar Systems * 2520 N. Coyote Dr. #111 Tucson, AZ 85745 * (520) 344-7348

www.luntsolarsystems.com

Summary of Contents for LS60Tha

Page 1: ... aware that you are viewing in direct sunlight Take necessary precautions to protect yourself from sunburn and heat exposure Never attempt to disassemble the system Doing so will void your warranty and compromise its safety Do not use your system if it is compromised in any way due to mishandling or damage The Blocking Filter diagonal must always be in place when the telescope is in use Lunt Block...

Page 2: ...ravel 7 Look through the eyepiece Do you see a fuzzy red ball If not make sure you have removed the dust cap from the front and check your alignment to the Sun If the Sun is still not in the field of view of your eyepiece move the telescope around a little while you are looking through it Be patient you will find it Once you do center the Sun and if you have one adjust the Sol Searcher 8 Tune That...

Page 3: ...al for the LSTHa telescope and tune it carefully screw your double stack LSFHa filter into the solar telescope pic 1 look thru your telescope and tune your double stack filter pic 1 It can happen that you will see the following picture in your eyepiece pic 2 after you have your double stack filter screwed on Than you just have to tune your double stack filter to move the sun reflexes out of your f...

Page 4: ...cope This is a short manual for you people using your own telescope with our LS Filters Now take a look how you can use the Double stack filter see your manual for the LSFHa Filter and tune it first carefully screw your LSFHa Double stack filter on your first one pic 3 now look thru your telescope and tune your Double stack filter as you did the first one that s it pic 3 Sun Reflex Reflex ...

Reviews: