13
DALI Touchpanel, Manual © 2017/01/16, Lunatone Industrielle Elektronik GmbH
Configuration of CmdX/CmdY
CmdX and CmdY are commands or command lists that are executed as result on the switching action.
These are:
•
DALI commands
•
Predefined macros (command lists)
•
Customized macros
DALI-commands:
Command
Number
Command Name
Function
-
DIRECT ARC POWER direct arc power level in %
0
OFF
Light off
1
UP
Dim up (fade-rate)
2
DOWN
Dim down (fade-rate)
3
STEP UP
Increases light level by one increment
4
STEP DOWN
decreases light level by one increment
5
RECALL MAX
Recalls max level
6
RECALL MIN
Recalls min level
7
STEP DOWN AND
OFF
decrease light level by one increment, if already at min level turn off
8
ON AND STEP UP
Switch to minimum if off, in any other case increase light level by one
increment
10
GOTO LAST ACTIVE
LEVEL (DALI 2)
DALI2 command: switch to last active level
16-31
GO TO SCENE
Recall scene 0-15
Macros:
Nr
Macro (memory)
Function
M1
Go Home
(2 Byte)
The light dims to 0 with predefined fade time, at the end a new fade time
is set
M2
Sequential Scenes
(3Byte)
Switch to another scene with each button press, scene list can be defined
M3
Dynamic Scenes
(9 Byte)
Dynamic sequences of up to 4 scenes, fade time and delay can be defined,
stops with next button press
M4
DALI-Reset
(1 Byte)
Sends DALI-Reset command (as option the address can be deleted, too)
M5
User Defined Cmd-List
(5 Bytes for each cmd) User defined command list
M6
3x Cooler (DT8)
(0 Byte)
activates DT8 and sends 3x STEP COOLER
M7
3x Warmer (DT8)
(0 Byte)
activates DT8 and sends 3x STEP WARMER
Hint
: The memory for macros is limited (236-16*number of buttons) and must not
exceeded (check memory of each macro in macro table)
