Lunar DPX-IQ, Operator'S Manual, Page: 98 / 166

D-8 Total Body DPX-IQ Operator’s Manual
Figure D-8. Cut regions
D.3.2 Standard and Extended Research Analysis
Total body analysis has a Standard Analysis and an Extended Research
Analysis option:
• Standard Analysis is the default mode. It gives accurate total body results for
patients who weigh less than 75 kg.
• Extended Research Analysis is recommended for patients who weigh more than
75 kg. It is necessary to carefully position cuts for Extended Research Analysis.
Refer to section D.3.1.
To change analysis modes:
1. At the Bone Results screen, select
$
. The Auto Analysis screen is shown.
2. The mode NOT in use is shown next to option
$
. Select
$
to change the analysis
mode.
3. Select
!
. The message that follows is shown:
Change Cuts Now?
(Y/N)
➊
➋
➌
➍
➎
➏
➐
➑