luminii Optic Arts CH-MD-LS-SF Series, Installation Instructions

Page: 1 / 2

4”
every 30”
fixture
surface
CH-MD-LS-SF & CH-MD-TL-SF Channel
-
Installation Instructions
Please read all instructions prior to installation and keep for future reference!
1. Product to be installed by a qualied electrician.
2. Prior to installation ensure power is off at fuse box to prevent electrical shock.
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Page 1 of 2
1.1
Snap the lens into the channel, then align & center the channel to the
determined location. Then make any reference marks if needed to install
the channel, reference step 3 for mounting options.
Note:
Prior to install, 24VDC power must be present for wiring. Also
review and account for all parts necessary to install properly.
REV0.0 03092020
Caution:
Safety equipment is recommended, when modifications are being
made to the channel & lens.
2.1 Extrusion & lens can be cut in the field. Using the proper blade for
aluminum, cut to the desired length.
channel
1.1
miter saw
Models CH-MD-LS-SF-XX & CH-MD-TL-SF
channel
STEP A STEP B STEP C
tighten screws below
channel surface
before installing LineLED drill through
channel for
mounting
holes countersink
the holes
3.1
Secure the channel to the surface by either mounting directly with screws or using mounting brackets.
Make counter sunk holes through the channel followed by screwing directly to the surface. a. If mounting channel with screws:
b. If mounting channel with brackets : fixed mounting brackets For , install a bracket 4” from each end, followed by installing one every 30”. Then secure, by
screwing through the bracket to the surface. For , install a bracket 4” from each end, followed by installing one every 30”. adjustable mounting brackets
Secure in place by screwing through the bracket to the surface. If necessary loosen the screw on the side & rotate to the desired position, followed by
tightening the screws.
channel
4.0”
30.0”
30.0”
4.0”
MOUNT CHANNEL
WITH SCREWS
install #4 flat head wood
screws a maximum 30"
apart minimum of 2
screws per channel.
a
mounting
bracket
1
4”
adjustable mounting
bracket
2
lens
channel
2.1
2.1
3
fixed mounting
bracket
adjustable
mounting bracket
MOUNT EXTRUSION WITH FIXED OR
ADJUSTABLE BRACKETS
b
b