Please read all instructions prior to installation and keep for future reference!
1. Product to be installed by a qualied electrician.
2. Prior to installation ensure power is off at fuse box to prevent electrical shock.
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Models MP-DO-DW-22K-60K & MMP-DO-DW-22K-60K
Page 1 of 5
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.0 11012019
Matrix Plus Dynamic White
-
Installation Instructions
1
1.1
2
1.1
Clean the area thoroughly from any dust and or adhesive residue where
the Matrix will be installed. Reference the sample layout on page 3 for
additional information.
1.2
Remove the paper backing from the Matrix. Carefully stick onto the
surface firmly. Make sure there are no air bubbles or ripples that can cause
irregularities and affect from sticking on correctly. If adhesive not sticking
well to the surface. Reference step 4 to use mounting hardware
(not included).
Note:
Matrix can be cut along the dashed lines to configure into
varies configurations. Reference step 2 for additional information.
Note:
When removing the backing & placing the Matrix to the
surface, avoid any ripples. As shown in FIG.1.
CORRECT
NOT CORRECT
Matrix Plus
Matrix Mini Plus
Matrix Plus
Scissors
or shears
1.2
Matrix Plus configurations
Matrix Mini Plus configurations
Matrix Plus & Matrix Mini Plus used togther
Note:
Matrix Plus & Matrix Mini Plus can be installed in multiple configuration. 1 male adapter must be connected from 1 section to
the next to work properly.
male
adapter
FIG.1
2.1
