Luminex Luminex 200, System User Manual

Page: 14 / 64

Luminex 200 System User Manual
4
The following label appears on the back of the Luminex 200
instrument.
Under NO circumstances should you remove the Luminex 200
analyzer cover!
When performing routine maintenance, turn power
to the Luminex 200 analyzer OFF and disconnect the power cord.
All laser apertures are located within the Luminex 200 analyzer and
are contained within a protective housing.
Barcode Reader Laser
Do not stare into the beam or shine it into other people’s eyes.
Warning: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.