D
e
G
H
I
J
K
l
m
f
n
C
SCENARIO 3(C): SEPARATE VLANS FOR ALL INTERFACES
Groups/VLANs including an ISL group (Trunk) can be assigned to ports and interfaces.
This can be useful when data from different applications, in coexistence with the lighting data, needs to be
transported over the same network.
The lighting data input, the lighting data output, and the management of the LumiCore can be separated
in different network groups and can each have a unique IP address.
In the Input interface:
Enter the IP address you wish to use
(D)
.
Enter the subnet you wish to use.
Enter a gateway IP address if required.
Enable/Disable Allow config
(E)
. When disabled, users will not be able to reach the web-UI on
this IP address.
In the Group/Trunks window
(F)
select the group for the lighting data you wish to use.
With the group selected, click the group assignment on the input interface
(G)
.
In the Output interface:
Enter the IP address you wish to use
(H)
.
Enter the subnet you wish to use.
Enter a gateway IP address if required.
Enable/Disable Allow config
(I)
. When disabled, users will not be able to reach the web-UI on
this IP address.
In the Group/Trunks window
(F)
select the group for the lighting data you wish to use.
With the group selected, click the group assignment on the output interface
(J)
.
In the System interface:
At the bottom-right of the System interface, use the slider to enable the interface.
Enter the IP address you wish to use
(K)
.
Enter the subnet you wish to use.
Enter a gateway IP address if required.
3 | ConfIGUratIon
19
