Important safety instructions
BEFORE USING THIS PRODUCT, CAREFULLY READ THE APPLICABLE ITEMS OF THE FOLLOWING
SAFETY INSTRUCTIONS:
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way such as:
x
Power-supply cable or plug is damaged.
x
Liquid has been spilled into the apparatus.
x
An object has fallen into the apparatus.
x
The unit has been exposed to rain or moisture.
x
The unit does not operate normally.
x
The unit was dropped or the chassis is damaged.
Do not remove the top cover. Removal of the top cover will expose hazardous voltages. There are no
user serviceable parts inside and removal may void warranty.
To prevent your product from overheating, do not operate it in an area that exceeds the maximum
recommended ambient temperature of 50°C for the GigaCore 30i and for the GigaCore 30i with PoE.
The equipment should be installed in an area that it is unlikely for children to have access to the
equipment.
The equipment must be installed and protected from rain and humidity.
The equipment requires a building installation protection of maximum 25A or less.
Apparatus with mains power connection must be earthed!
WARNING
: Avoid electric shock and fire hazard! Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
VENTILATION OPENINGS:
The system heat vents, located at the front and rear, dissipate heat. Do not block these openings. Leave at
least 12.7 centimeters of space at the front and rear of the switch for proper ventilation. Be reminded that
without proper heat dissipation and air circulation, system components might overheat, which could lead
to system failure or even severely damage components.
4
