FIRMWARE UPGRADE
You can upgrade the GigaCore 30i with our latest firmware. The quickest and most convenient way to
upgrade your device(s) is with the Araneo software.
Alternatively, you can upgrade the device via the build-in web-UI. To upgrade the device, please apply the
following procedure:
Download the latest firmware from the support section of our web site. http://www.luminex.be/
support-2/product-downloads/
Extract the downloaded archive and have a look at the release notes included.
Click on the firmware upgrade button in the web-UI of your device.
Select the file you have extracted.
The GigaCore will start the firmware upgrade. The device will reboot after the upgrade is completed.
RESET
In this panel, you can reset the GigaCore, with two separate options:
Preserve IP address, all settings get restored to factory default apart from the IP address set to reach the
device. All saved profiles will be lost.
Preserve profiles, during the reset the custom stored profiles are being kept.
Click on the Reset button to perform the selected reset.
Performing a reset with these two options disabled will bring the GigaCore to its factory settings.
REBOOT
Press the “Reboot” button to reboot the device. All settings will be preserved.
3 | confIGuratIon
27
