3.5 toolbox
The toolbox page is divided in four sub menus:
PROFILE MANAGER
The profile manager allows the user to save, recall, export or import a configuration.
A profile contains the following parameters:
Device settings.
Port settings.
RLinkX settings.
Group settings.
PoE settings.
This way, the user can create a comprehensive configuration for a switch, save it as a profile, and recall it
later when needed.
A maximum of forty profiles can be saved on a GigaCore 30i switch. The switch also offers to export or
import a profile through a computer, providing the user with an easy way to exchange profiles between
switches.
RECALL A PROFILE
Select the profile with the drop-down menu. Once a profile is selected, a preview of the configuration is
shown below the drop-down in graphic form.
With the slider, the user can choose to preserve the current IP settings of the switch or to reload the IP
settings stored in the profile. By default the current IP address is preserved.
FIRMWARE
In the firmware section, two versions of firmware are shown:
Active firmware
: is the one currently running on the device.
Alternate firmware
: is the previously installed firmware.
If you would like to downgrade the device to the previously installed firmware, click on the activate button.
The device will reboot in this firmware.
3 | confIGuratIon
26
