Luminex GigaCore 30i, User Manual

Page: 24 / 38

3.4 Device settings
The device settings page is divided in eight sub menus:
IP SETTINGS
Assign here the IP mode and IP address of your switch. This IP address will be used to reach the switch’s
web interface. The default IP address can be found at the rear of the device or on the E-ink display.
There is one IP mode available:
ƒ
Static (default)
Enter your preferred IP address and the subnet mask. Enter your default gateway IP address if your
switch needs to be reached from a routed network. Press apply to safe your setting.
Other options available in the IP Settings menu are to enable or disable mDNS discovery (default is
enabled) and to show or hide the IP address on the E-ink display (default is enabled).
ID SETTINGS
Here you can set the ID number of the switch and give the device a name and description to easily identify
your switch in the network.
SECURITY
The user can use this feature to set a password to protect the access to the web interface. The default login
for the web interface is:
Username: admin
Password: No password
DEVICE INFO
The device info window shows:
ƒ
Model.
ƒ
MAC address.
ƒ
Serial number of your device.
GENERAL POE SETTINGS
The general PoE settings allow you to set:
ƒ
Power allocation:
Consumption , the actual consumed power is being used to determine the maximum output power.
Reserved , the class is used to reserve the maximum allowed power for that class to determine the
maximum output power.
3 | confIGuratIon
24