a
b
c
D
e
e
f
D
G H
I
J
J
2.4 Description
FRONT PANEL
(A) Status LEDs:
OK: indicates the general status of the switch.
Power: indicates the status of the power supply.
RLinkX: indicates the RLinkX status.
PoE: indicates the status of the PoE functionality and the PoE supply (GigaCore 30i with PoE only).
(B) E-ink Display:
E-ink display: indicates the options the switch has and the IP address (unless disabled in the settings).
(C) Mode:
Mode LED: indicates the selected state for the port Mode LEDs (see the “LED indicators” section in this
manual for more details).
Mode button: use this button to cycle through the different states for the port Mode LEDs.
(D) Port LEDs:
Port Mode: According to the selected state, the LED will show different colours.
Port Link/Speed: Shows the current speed and link activity of a port.
(E) RJ45 Ports:
24x RJ45 10/100/1000Mbps port.
(F) SFP+:
6x SFP+ cage for SFP+ transceiver.
REAR PANEL
(G) Serial Port:
1x RS232 console port on USB-C.
(H) LED Extension Port:
1x LED extension port for optional LED panel on USB-C.
(I) Fans:
3x Fan.
(J) Power
:
Options for up to 2x slide-in power supply.
2 | InstallatIon
15
