Lumin Smart Panel - Outdoor
DOCUMENTATION AND INSTALLATION MANUAL
29
STEP 22. Replace Electrical Panel Cover and Turn On Main Feed
WARNING: HIGH VOLTAGE. ENSURE MAIN BREAKER IS OFF. MAIN SERVICE LINES ARE ALWAYS LIVE.
AVERTISSEMENT: HAUTE TENSION. ASSUREZ-VOUS QUE LE DISJONCTEUR PRINCIPAL EST ÉTEINT. LES
CONDUCTEURS DE SERVICE PRINCIPAUX SONT TOUJOURS SOUS TENSION.
Tools
: Screwdriver
NOTE:
Please make any necessary exterior wall repairs (if applicable) and clean up the area around the
circuit breaker panel once the LSP installation is completed. If the LSP cover has not been removed,
remove it: unlatch the toggle clamps from both sides and pull the bottom of the cover away while
lifting upwards. Ensure the LSP power switch is set to OFF (O). Then turn on the main feed.
