Lumin Smart Panel - Outdoor
DOCUMENTATION AND INSTALLATION MANUAL
15
STEP 8. Connect LSP Equipment Grounding Conductor (EGC) to Ground Bar
WARNING: HIGH VOLTAGE. ENSURE MAIN BREAKER IS OFF. MAIN SERVICE LINES ARE ALWAYS LIVE.
GROUND WIRE MUST BE INSTALLED FOR SAFETY.
AVERTISSEMENT: HAUTE TENSION. ASSUREZ-VOUS QUE LE DISJONCTEUR PRINCIPAL EST ÉTEINT. LES
CONDUCTEURS DE SERVICE PRINCIPAUX SONT TOUJOURS SOUS TENSION. UN FIL DE TERRE DOIT ÊTRE
INSTALLÉ POUR LA SÉCURITÉ.
Tools
: Screwdriver and pliers (optional)
NOTE:
Connect the EGC (bare copper wire) from the LSP to the existing ground bar in the electrical
panel (exact location of ground bar may vary).
EGC to
Ground Bar