2
WIRING DIAGRAM
120VAC
AC plug (optional configuration)
Switching line
The next plant growth lamp can be connected
Note: up to 10PCS
At Most
：
Max10PCS
AC
UL
1
TECHNICAL SPECIFICATIONS
PGL050-TLA30
SUGGEST HANGING DISTANCE
SUGGEST LIGHTING TIME
ASSEMBLY INSTRUCTIONS
Product Code
Power
Input Voltage
Input Current
Lumen (lm)
CRI
/CCT
Spectrum
Height
Beam Angle
IP Class
Operation Temp & Humidity
Speration Temp & Humidity
Product L* W * H (mm)
Carton L* W * H (mm)
NW (kg) ±0.1
GW (kg) ±0.1
50W
100-305VAC
0.42A/120Vac
6000 lm
Ra95 / 5000K
PPFD
（
Height 60cm
）
PPFD
（
Height 30cm
）
80.448 μmol/(m²·s)
154.16 μmol/(m²·s)
330
～
880nm
12
～
24 inch
110°x115° Rectangular Beam
IP65
1125*53*28
1180*60*22 (1200*250*190
，
20pc
）
0.6Kg
0.8Kg
PGL050-TLA30
Grow tips
-
The rate of photosynthesis and transpiration are directly affected by temperature, humidity and air flow
；
-
The perfect temperature and humidity for your plants are found between 75-85 °F and 50%-70% humidity
；
-
With plenty of airflow to replenish CO2
；
- The suitable PH is 6-6.5；
- Y
ou may add more calcium and magnesium than normally needed
.
Germination: 24-30 inch
Seeding: 24 inch
Veg: 18-24 inch
Flower: 12-18 inch
Veg: 18 hours ON
Flower: 12 hours ON
-Open the package and fix 4 screws on the bracket of the plant lamp, Let the light source faces the plant；
-Connect the power-line(optional configuration) to the lamp and tighten it；
-Insert the plug into the socket.
IMPORTANT SAFETY PRECAUCTIONS
Spectrum
1.2
1.0
0.8
0.6
0.4
0.2
0.0
350
513
675
Wavelength(nm)
838
1000
1.0=150.014mW/nm
0
30
60
90
120
150
-/+180
-150
-120
-90
-60
-30
UNIT:cd
C0/180,115.6
UNIT:cd
C90/270,111.8
AVERAGE BEAM ANGLE(50%):113.7 DEG
0
500
1000
1500
2000
2500
screw down
-20
～
45
℃
, 20
～
95%RH No condensation
-20
～
85
℃
, 10
～
95%RH No condensation
PGL050-TLA30 PLANT GROWTH LAMP SIZE
：
screw down
Please read the manual thoroughly before attempting to install or operate LED Grow Light and keep it
for future reference.
Connect the light only to the power sources of the appropriate voltage using the plug received.
Protect power cables from being pinched or damaged, especially where the power cable enters the power
outlet and the unit.
If the provided plug does not fit your socket, please contact us for help by email immediately.
Please do not replace the power cord or plug by yourself, otherwise we are not responsible for man-made damages.
The system should only be cleaned as directed in the manual. You should seek service by qualified
service personnel if any of the following occur:
1.The power-supply cord or the plug has been damaged;
2.The unit has been exposed to rain;
3.The unit exhibits a marked change in performance;
4.The unit has been dropped, or its enclosure or chassis is damaged.
