VC-WM14 Installation Guide
www.MyLumens.com
5100453-51 MAR. 2022
2. Product size and hole sites
1. Package Contents
Drilling paper
PTZ Camera
Locking screw
*4 pcs
4. Instruction for installation steps
3. Precautions for installation
3.1 Load Capacity: 2 Kg
3.2 Follow these procedures step by step, to ensure correct installation of the
device.
3.3 Do not install the bracket on an unstable ceiling or wall. Install the bracket in
a position that does not cause an obstruction or hazard.
3.4 Do not use the VC-WM14 to mount box cameras to a wall or ceiling. Using
VC-WM14, box cameras should only be mounted to a monitor.
3.5 For detailed dimensions and a technical drawing, please go to the
Area.
Lumens website > Service Support > Download
https://www.MyLumens.com/Support
4.1 Instruction for ceiling installation
1. Use the Drilling Paper to mark and drill holes in the ceiling.
2. Fix the short side of the metal bracket to the ceiling.
3. Fix the camera on the long side of the metal bracket and lock with 4x screws.
4. Loosen the hexagonal screws on both sides to adjust the installation angle.
Tighten the screws to fix the position.
guide
Installation
Box Camera
Locking screw
j
Foot pad hole
k
Screw hole
l
Screw hole for box Cameras
Copyright © Lumens Digital Optics Inc. All rights reserved.
VC-WM14
196.6 mm
218.2 mm
17.6 mm
j
k
k
k
j
l
j
j
Support arm
x2pcs
M6*10 screw
x4pcs
