4
Chapter 2 Product Overview
The LC100 CaptureVision Station uses the Linux operating system and an ARM
architecture processor to provide stable recording services. It supports video recording,
mixing and switching from various input signal sources. It enables voice, image, and data
in bidirectional transmission through the public network and support pre-scheduled
recording and uploading. You can start recording automatically without being on site.
LC100 is widely used in education, corporate meetings, government agencies, etc., for
live or recorded environments.
NO
Name
Function Descriptions
NO
Name
Function Descriptions
1.
LCM
Display Menu and
Information
16
DC IN 12V
DC 12V power connector
2.
Knob
LCM knob
17
Input1
HDMI input 1
3G-SDI input 1
HDMI Passthrough
3
Record
Start/Stop recording
Press and hold for 3
seconds: Pause Recording
4
Stream
On/Off image streaming
18
Input2
HDMI input 2
3G-SDI input 2
5
Scene
Switch templates
19
Output
PGM: Main screen output, display the
recording or streaming screen and layout
Multiview: Operation interface output; display
the settings menu and image management
6
Power
On/Off the device power
Press and hold for 6
seconds: Force to reboot
7
Single
Channel
Display a single channel
screen
8
PIP
Switch to PIP (picture in
picture)
9
PBP
Switch to PBP (picture by
picture)
20
USB3.0 port
Supporting the following devices:
USB video/audio devices
External storage disk
Keyboard/mouse device
LC-RC01 (optional) USB connection
10
SWAP
Switch CH1/CH2 signal
channels
11
USB 3.0 port
External storage disk
12
USB 3.0 port
External storage disk
13
USB 2.0 port
External storage disk
21
Ethernet
Can connect to a router or hub
14
Factory Reset
Reset all configurations to
factory default settings
22
RS-232/
RS-485 port
Connect to AV control equipment
15
Restart
Reboot the machine
23
XLR audio in
Connect to a microphone or audio mixer
24
Line In/Out
Audio In/Out
Front panel
Rear panel
