Lumenera Lt-C1610, User Manual

Page: 138 / 144

132 • Troubleshooting Teledyne Lumenera Lt Series
•
Click Press… next to Camera Reset.
•
Cycle the camera power.
The camera is now in LuCam mode. Sapera LT CamExpert cannot access the camera.
To return the camera to USB3 Vision mode, follow the procedure from section Switching a
Teledyne Lumenera camera from LuCam mode to USB3 Vision mode.
8.6 Lumenera LuCam API for Linux OS
The Linux LucamSDK provides a LucamAPI-compatible driver and example applications.
To install the driver and compile the sample applications
1. Download the LucamSDK software package and untar it.
2. Unplug any Lumenera devices from the system.
3. Change to the SDK directory:
cd lucam-sdk_<version>
4. Compile the driver and install it:
sudo make install ALL_DRVS=1
5. Compile the example applications:
make examples
6. Plug a supported Teledyne Lumenera camera into a USB 3.x port.
7. Confirm that the driver is functional, and communicate with the camera by running the
‘helloCamera’ example program:
./examples/helloCamera/helloCamera
8. You should see the following output:
Hello camera!
In the doc/ directory of the LinuxSDK, you will find the Lumenera USB Camera API Reference
Manual if you need more information on using the API to communicate with the camera with your
own applications.