LumaSMART
®
User Manual
DNP3 Protocol Testing
•
124
2.
Select the
Target
to
Use Command Window target Selection
– not ‘mDNP:mDNP’
3.
Select the desired channel by setting the
Point Number:
to its corresponding channel number (Point
numbers 0
⇒
15 are mapped Channel numbers 1
⇒
16).
4.
Select the action to take in the
Control Code
: ‘loff’ to disable. (‘lon’ to enable)
5.
Press
Once
.
6.
Verify that the desired Relay changed in the
Data View
window:
7.
Check the LumaSMART display. It should show channel 4 as disabled:
LumaSMART display
8.
Set the
Control Code
to
lon
and press
once
to re-enable the channel.
8.6
Analog Inputs
Select the Binary Output Statuses data in the data window:
