24
Operating the Controller
Using Other Devices with the Controller
The controller can communicate with devices other than
Lumascape low-voltage integrated LED boards. Two of those
devices include the Luxor CUBE and the Luxor ZD MR-16 Lamp.
Luxor CUBE
The Luxor CUBE allows the controller to control, zone, and dim
lighting luminaires and other device that don’t have built-in
ZD technology. Install the CUBE in-line prior to the luminaires
or devices you wish to control as a zone. When that zone is
activated by the controller, all luminaires or devices in-line after
the CUBE will initiate and dim according to the commands
of the controller.
The CUBE is offered in three models to ensure maximum
flexibility:
• Low-Voltage Lighting (LCM-LV)
• Line-Voltage Lighting (LCM-HV)
• Relay and 0–10 V Dimming (LCM-RLY-010V)
Luxor ZD MR-16 Lamp
The ZD MR-16 is a convenient, high-quality LED replacement
lamp that converts incandescent luminaires to energy-efficient
LED luminaires. When connected to a ZDClink Controller, the
ZD MR-16 adds zoning, dimming, and control capabilities to any
brand of low-voltage landscape lighting luminaire utilizing an
MR-16 socket.
Figure 24: Luxor CUBE
Figure 25: Luxor ZD MR-16 Lamp
For additional information on installing the CUBE
please use the wiring diagram located in the
installation guide included with the product.
Summary of Contents for ZDClink Luxor SATlink
Page 39: ...39 Notes ...