Installation.
No tools required for installation.
After unpacking the lamp and LumaCross bulb, simply insert the base of the
bulb into the lamp socket and turn clockwise until the base of the bulb is firmly
seated in the socket.
DO NOT OVERTIGHTED the bulb as it can damage the bulb.
THIS LAMP IS DESIGNED FOR OPERATION IN THE U.S. ONLY.
Remove preassembled cap from end of power cord and plug power cord into
wall outlet. Turn the on/off switch clockwise until the desired brightness is
achieved.
TROUBLE
-
SHOOTING
Problem: Light does not come on.
Solutions:
1. Verify that lamp is plugged into outlet and power supply is ON.
2. Verify that bulb is installed correctly.
