background image

 

www.LumaComfort.com 

I

MPORTANT 

S

AFETY 

I

NFORMATION

 

These  instructions  are  not  meant  to  cover  every  possible  condition 
and situation that may occur. Please read all instructions before using 
this evaporative cooler. Failure to carefully read all instructions may 
result  in  possible  electric  shock  or  fire  hazard,  and  will  void  the 
manufacturer’s warranty. 

1.

 

Use this evaporative cooler only as instructed in this owner’s manual. Other uses 
may cause electric shock, injury or fire.  

2.

 

Close supervision is required if this cooler is used near children or pets.  

3.

 

To protect against electric shock, do not immerse this cooler or its plug and cord in 
water.  

4.

 

If the cooler is being transported or will not be in use, disconnect it from the power 
supply  by  tightly  gripping  the  plug  and  pulling  it  from  the  power  outlet.  Do  not 
disconnect the power supply by pulling on the evaporative cooler’s power cord.  

5.

 

Avoid contact with any of the evaporative cooler’s moving parts.  

6.

 

Place the evaporative cooler on a level surface.  

7.

 

This evaporative cooler is intended to fit into a matching receptacle. 
Under  no  circumstances  should  the  plug  be  altered  in  any  way.  An 
improper connection can result in electric shock.  

8.

 

If possible, avoid using extension cords with this evaporative cooler. If an extension 
cord is absolutely necessary, do not use more than one extension cord and do not 
use a single extension cord to operate more than one cooler.  

9.

 

Do not insert objects or allow fingers to  enter into the cooler’s  grills, as this may 
cause electric shock or bodily injury. Do not block or tamper with the evaporative 
cooler while it is in operation.  

10.

 

Do not run the power cord under mats or carpeting, and do not cover the power 
cord with runners. Arrange the power cord away from room traffic or where it can 
be tripped over.  

11.

 

Do not operate this evaporative cooler in the presence of flammable substances or 
explosives.  

12.

 

Do not place the cooler near an open flame or cooking/heating appliances.  

13.

 

This product is not intended for use in wet or damp areas. 

14.

 

If the evaporative cooler will not be in use, empty the tank of any remaining water.  

15.

 

If  the  cooler’s  plug  or  power  cord  is  damaged,  do  not  attempt  to 
repair  the  components  yourself.  Please  contact  Luma  Comfort’s 
customer  service  hotline  at  1-866-737-6390  or  have  the  unit 
examined by an authorized service provider.  

Summary of Contents for EC220W















Reviews: