Luma Recorders
|
Web Interface
Overview of the Web UI
If your system is connected to the Internet, you can access and
control your system through a web-based interface, no matter where
you are.
The web interface has four screens: access, live, log, and
configuration.
Getting to Your Access Page
Your system should have been set up to allow you to access it with
an Internet browser, either by its direct IP address or by an easy-to-
remember DDNS address such as MyHome.WirepathDNS.com. If it
was not, see the quick start guide.
From the access page, log in with your account name and password.
You are automatically taken to the live page.
Live Page
This page is the main interface of the system, which shows you the
screens of all your cameras in matrix view, along with the timeline
and other controls across the bottom, and the main menu items
along the right side. These controls are all discussed in “Live View
Screen” on page 60.
Click on the Settings icon
at right to get to the log page
and the configuration page.
Summary of Contents for LUM-500-DVR-16CH
