Luma Surveillance LUM-500-DVR-16CH, Technical Reference Manual

Page: 85 / 217

Luma Recorders
|
Remote Control
Jump to Main TOC 85 Jump to Remote Control
While in Menu Mode
When you are in any window or menu other than the PTZ control
panel, you can use the following controls to move within the menu
system, or to edit the contents of a selected text box:
1) Power
This reboots your recorder. Use the arrow
keys and Enter key to confirm your choice.
It will not cut power to the device; you’ll
have to flip the power switch. This also
does not power your recorder up.
2) Dev
This enables or disables the remote control.
See the Troubleshooting section for more
details.
3) Keypad Group
When you are actively editing a text field,
use these keys to enter either numbers or
letters. By default, they enter lowercase
letters, unless you are editing a field that
accepts only digits. Press a given key once
for the first associated letter, twice for the second, etc., just like
texting on your phone.
To get uppercase letters, press the A key. To get numbers, press the A
key again. Pressing the A key a third time gets you back to lowercase
letters.
4) Edit
When an editable field has been selected, shown by a bright yellow
bar around it, pressing
Edit activates that field so you can enter text
into it.
While editing a field, this button acts as a backspace button, deleting
the last character entered.
When a checkbox has been selected, pressing Edit toggles that
checkbox from selected to deselected and back.